Installing a magnetic doorstop is very simple; it prevents the door from slamming shut and keeps it open. Here is a step-by-step installation guide:

Required tools and materials:

· Magnetic doorstop set (includes magnet and base plate)
Drill holes using appropriate drill bits.
screwdriver
tape measure

· Level (optional)
pencil or marker

Installation steps:

00001. Choose a location:

· Determine the installation location of the magnetic doorstop. Typically, it’s installed on the wall opposite the door or on the baseboard.

00001. Mark the location:

· Use a tape measure to measure the appropriate height of the door stop. The door stop is typically about 36 inches from the ground, but the exact height can vary depending on the style of the door and personal preference.

· Mark the locations on the wall where you will install the magnets.

00001. Install the magnets:

· Secure the magnet to the marked position and mark the position of the screw hole with a pencil.

· If necessary, drill guide holes at the marked points (especially when drilling holes in drywall or hard surfaces).

· Use the screws provided in the box to secure the magnet to the wall. Make sure it is secure.

00001. Install the nameplate on the door:

· Close the door and press the metal plate against it to align it with the magnet.

· Use a level to ensure the board is level, then mark the positions of the screw holes with a pencil.

· Drill guide holes in the door if necessary.

· Use the provided screws to secure the metal plate to the door.

00001. Testing the door stop:
Open the door and see if it aligns with the magnet. The magnet should hold the door firmly in place.

· If necessary, adjust the position of the magnets or base plate and tighten all screws.

00001. Final Adjustments:

· If the door does not remain open as expected, you may need to slightly adjust the position of the magnet or the baffle.
Make sure all parts are tightened securely.

# # Tip:

· If you are going to install the stop on the baseboard, be sure to use longer screws if necessary to ensure a secure installation.

· If you are unsure whether to drill holes in a wall or door, consider using the adhesive options provided in the magnetic doorstop kit.

By following these steps, you can quickly install a fully functional magnetic doorstop!