To install a spring door stop, please follow these steps:

Required tools and materials:

· Spring door stop

· Drilling (if necessary)

· Screws (usually supplied with doorstops)
screwdriver
tape measure

· pencil

Installation steps:

00001. Choose a location:

· Decide where you want to install the spring doorstop. It can be installed on a wall or a baseboard, depending on the doorstop’s design and your personal preference.

00001. Mark the location:

· Use a measuring tape to measure the height at which you want to install the stop. Typically, the stop should be about 2-3 inches from the ground.
Mark the location with a pencil.

00001. Drilling (if necessary):

· If the doorstop requires screws for securing it, drill holes at the marked locations. Be sure to use a drill bit that matches the size of the screws provided.

00001. Install doorstops:

· Align the door stop with the drill hole or marked position.

· If it has a mounting plate, install the mounting plate first, and then fix the spring mechanism to the mounting plate.

· Use a screwdriver to insert and tighten the screw to ensure the plug is securely in place.

00001. 

Testing the door stop:
Open the door and check if the spring-loaded doorstop is effectively preventing the door from hitting the wall or closing accidentally. Adjust its position if necessary.

00002. 

00003. 

Final Adjustments:

00004. 

· If the door stop is adjustable, you may need to adjust its position or tension to ensure it works properly.

Tip:

· Ensure the doorstop is installed at the correct height, so that it functions effectively without obstructing the movement of the door.

· If you are going to mount it on a wall, make sure the wall material can support the screws (e.g., drywall, wood).

By following these steps, you should be able to successfully install the spring door stop.