info@yako-hw.com
+86-13380989888
0750-3278683
Pull Handles are an essential part of Cabinet Hardware that not only enhances the functionality of your cabinets but also adds a touch of style to your kitchen or bathroom. Whether you are remodeling your space or simply updating the look of your cabinets, installing Pull Handles can be a rewarding DIY project. In this article, we will guide you through the process of installing pull handles on cabinets, and we will also introduce you to our brand, YAKO, which offers a wide range of high-quality hardware solutions.
Before we dive into the installation process, let's take a moment to introduce YAKO. YAKO is a renowned brand in the hardware industry, known for its commitment to quality, innovation, and design. With a focus on delivering durable and stylish products, YAKO has become a trusted name for homeowners and professionals alike. You can explore their extensive collection of Cabinet Hardware at YAKO's official website.
To install pull handles on your cabinets, you will need the following tools and materials:
Pull handles (choose from YAKO's selection for quality and style)
Measuring tape or ruler
Pencil
Drill
3/16 inch drill bit
Screwdriver
Screws (usually included with the pull handles)
The first step in installing pull handles is to determine the exact position where you want to place them. This decision can depend on the type of cabinet and the overall design of your space. Here are some general guidelines:
For Wall Cabinets: Place the handle towards the bottom third of the cabinet door. This makes it easier to access the cabinet contents.
For Base Cabinets: Position the handle towards the top third of the cabinet door.
For Drawers: Center the handle both vertically and horizontally on the drawer face.
Once you have decided on the position, it's time to mark the holes where the screws will go. Here’s how you can do it:
Measure and Mark: Use a measuring tape to measure the distance from the edge of the cabinet door or drawer to where you want the center of the handle to be. Typically, this is about 50mm from the leading edge.
Draw a Light Line: Draw a light horizontal line across the cabinet door or drawer at the desired height.
Find the Center: Measure the width of the vertical stile (the vertical edge of the cabinet door) and mark the center. This will give you a "+" sign, indicating the exact spot for drilling.
With the marks in place, you can now drill the holes for the screws. Here are the steps:
Choose the Right Drill Bit: Most cabinet hardware screws require a 3/16 inch drill bit.
Drill the Holes: Open the cabinet door to avoid drilling into the cabinet itself. Drill through the front of the marked spot. Be careful not to drill too deep.
Now that the holes are drilled, you can install the pull handles:
Insert the Screws: Insert the screws through the backside of the pull handle.
Align and Attach: Hold the pull handle against the cabinet door or drawer, aligning the screw holes with the drilled holes. Push the screws through the holes and into the cabinet door.
Tighten the Screws: Use a screwdriver to tighten the screws, securing the pull handle in place.
Repeat the same process for all the cabinet doors and drawers in your space. Consistency in positioning and spacing will give your cabinets a polished and professional look.
Use a Template: If available, use a template provided by the manufacturer to ensure accurate placement of the holes.
Dry Fit: Before drilling, do a dry fit of the pull handle to ensure it looks good and aligns properly with the marks.
Check Measurements: Double-check your measurements to avoid any mistakes. A small error can lead to misaligned handles.
Installing pull handles on cabinets is a straightforward task that can significantly enhance the appearance and functionality of your cabinets. With the right tools, careful measurements, and attention to detail, you can achieve professional results. And when you choose YAKO for your hardware needs, you are guaranteed quality and style that will stand the test of time.
